24 00 018 Adjusting Selector Lever (A5S 360R/390R, A4S 200R, 6HP26Z/19Z)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Check cable for ease of movement.
Move selector lever to "P" position.

Grip clamping sleeve (1).

Slacken nut (2).

Press selector lever (3) forwards into park position. Press cable (4) in direction of arrow and release again.

Grip clamping sleeve (1).

Tighten down nut (2).

Tightening torque 25 16 2AZ. See 25 16 SHIFT CONSOLE - AUTOMATIC TRANSMISSION

Fig 1: Adjusting Selector Lever

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Move selector lever to "P" position.

Check whether parking gear is engaged by turning propeller shaft.