24 21 Input, Intermediate And Output Shafts
WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING SPECIFICATION - INPUT, INTERMEDIATE AND OUTPUT SHAFTS (24 21)
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Flange nut, output flange | A5S 300J | 225 Nm | ||
| Flange nut, output flange without spring washer | A5S 360R | 30 Nm | |||
| Flange nut, output flange, with spring washer | A5S 360R / A5S 390R / A4S 200R | 60 Nm | |||
| A4S 270R / A4S 310R | 100 Nm | ||||