24 00 018 Adjusting Selector Lever (A5S 360R / 390R, A4S 200R, 6HP26Z/19Z)

WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Check cable for ease of movement.

Move selector lever to "P" position.

Grip clamping sleeve (1).

Slacken nut (2).

Press selector lever (3) forwards into park position. Press cable (4) in direction of arrow and release again.

Grip clamping sleeve (1).

Tighten down nut (2).

Tightening torque 25 16 2AZ . See SHIFT CONSOLE - AUTOMATIC TRANSMISSION for specs.

Fig 1: Pressing Selector Lever Forwards Into Park Position

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Move selector lever to "P" position.

Check whether parking gear is engaged by turning propeller shaft.