24 2 310 Tool Kit For Removing And Installing Reverse Gear Piston

WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Note: For disassembling and assembling transmission for "Sealing intermediate plate" job

Transmission: A4S 270R, A4S 310R

SI number: 1 22 97(239)

Order number: 24 2 310

Tool kit for removing and installing reverse gear piston

Consisting of:

1 = 24 2 311 Pressure plate

Note: For removing and installing spring retainer

2 = 24 2 312 Spindle with pressure plate

Note: Spindle M14x1.5, nut M14, pressure plate and washer / For removing and installing spring retainer

3 = 24 2 313 Guide pin (2)

Note: For fixing gaskets and intermediate plates on intermediate housing

4 = 24 2 314 Slip bush

Note: For removing piston in cylinder of intermediate plate

Fig 1: Identifying Tool Kit (24 2 310)

Courtesy of BMW OF NORTH AMERICA, INC.