23 1 300 Fixture

WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

In conjunction with: 23 2 150

Note: For fitting output flange on all manual and automatic transmissions, for installing deep groove ball bearing on transmission output shafts and for fitting input flange on all rear axle differentials

Series: E36, E36/2, E36/3, E36/5, E36/7, E36/C, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E83, E85, E86, E87, E90, E91, E92

Transmission: HAG 188kom, HAG 220kom, HAG 225kom, HAG Type G, HAG Type K, HAG Type M, S5D 200G, S5D 250G

Storage location: B15, B16

Order number: 23 1 300

Fixture

Consisting of:

1 = 23 1 301 Adapter

2 = 23 1 302 Support disk

Note: For pressing drive flange onto rear differential

In conjunction with: 33 1 341, 23 1 300

3 = 23 1 303 Mandrel

Fig 1: Identifying Fixture (23 1 300)

Courtesy of BMW OF NORTH AMERICA, INC.