67 11 610 Removing and installing/replacing servodrive in storage compartment

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Disconnect battery negative lead . See THE BATTERY - OVERVIEW - ALL MODELS .

Disconnect plug connections (1)

Disconnect Bowden cable (2).

Press in button (3) and lift storage compartment (4) out of center armrest.

Fig 1: Identifying Plug Connections, Bowden Cable And Lift Storage Compartment

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect Bowden cable (1).

Installation:

Ensure correct cable routing.

Fig 2: Identifying Bowden Cable

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Pull servodrive (2) with locator (3) forwards from guide.

Fig 3: Identifying Screws, Servodrive And Locator

Courtesy of BMW OF NORTH AMERICA, INC.