66 54 010 Removing and installing complete night vision camera

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection) . See 61 35 ... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

Necessary preliminary tasks:

Remove front bumper trim . See 51 11 156 REMOVING AND INSTALLING FRONT BUMPER TRIM .

Disconnect plug connection (1).

Remove line for washer jet (2).

Release screws (3) and remove holder (4) with camera.

Tightening torque 15 N.m.

Fig 1: Identifying Screws And Holder

Courtesy of BMW OF NORTH AMERICA, INC.

After installation:

Fill up with washer fluid

Replacement only:

Replace Night Vision Camera