66 20 508 Removing and installing (replacing) control unit (Park Distance Control)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection). See 61 35 ... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

Necessary preliminary tasks:

Remove luggage compartment floor trim. See 51 47 101 REMOVING AND INSTALLING/REPLACING LUGGAGE COMPARTMENT FLOOR TRIM PANEL .

Unclip electrical leads (1) from mounting for control units (2).

Pull control unit (3) slightly out of mounting for control units (2).

Unlock plug connections (4) and disconnect.

Remove control unit (3).

Fig 1: Identifying Plug Connections And Control Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out programming/coding .