65 77 740 Removing and Installing (Replacing) Left Front Door Sensor
WARNING: This page is about a different car, the 2009 BMW 650i, 2008 BMW 650i, and 2007 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Note airbag safety instructions! See 72 00... SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS
Incorrect handling can activate airbag and cause injury.
IMPORTANT:
Read and comply with notes on protection against electrostatic damage (ESD protection)!
See 61 35... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE)
Necessary preliminary tasks:
- Remove front door trim . See 51 41 000 REMOVING AND INSTALLING LEFT OR RIGHT FRONT DOOR TRIM PANEL
- Detach sound insulation in work area. See 51 48 060 REMOVING AND INSTALLING/REPLACING SOUND INSULATION IN FRONT DOOR, LEFT OR RIGHT
Release screw (1) and remove front door sensor (2) from door.
Disconnect plug connection (3).
Installation:
Make sure rubber ring and sensor are securely seated.
Tightening torque 65 77 7AZ. . See 65 77 AIRBAG TRIGGERING CONTROL