65 75 080 Removing and Installing/Replacing Interior Movement Detection Module In Left Or Right Front Door

WARNING: This page is about a different car, the 2009 BMW 650i, 2008 BMW 650i, and 2007 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection). See 61 35... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE)

Necessary preliminary tasks:

Remove front door trim . See 51 43 002 REMOVING AND INSTALLING REAR LEFT OR RIGHT SIDE TRIM PANEL

Release screws (1).

Remove interior movement detection module (2) in direction of arrow from front door trim panel (3).

Fig 1: Removing Interior Movement Detection Module In Direction Of Arrow From Front Door Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out programming/coding using BMW scan tool.