65 11... Instructions On Setting The Installation Location On The CD Changer

WARNING: This page is about a different car, the 2009 BMW 650i, 2008 BMW 650i, and 2007 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: To ensure trouble-free CD changer operation, ensure both suspension springs are correctly positioned (horizontal/vertical). If necessary, correct adjustment.

To avoid premature contamination of the CD changer, make sure the magazine compartment flap is permanently closed.

NOTE: For purposes of clarity, the following graphics show the CD changer removed.

NOTE:

Observe the following repair instructions if the magazine cannot be removed from the CD changer.
- E36:
  Observe Notes on handling CD changers
- E60, E61, E63, E64:
  Remove CD changer magazine
- E83:
  Ejection via self-diagnosis
- E87, E90, E91:
  CD changer must be sent in

Remove cover cap (1) from CD changer (2).

Fig 1: Identifying Cover Cap For CD Changer

Courtesy of BMW OF NORTH AMERICA, INC.

Arrange installation location of CD changer (2) with a suitable tool by sliding suspension spring (1) into required position.

Fig 2: Identifying Vertical Or Horizontal Installation Of CD Changer

Courtesy of BMW OF NORTH AMERICA, INC.