LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 48i >> Repair and Diagnosis >> External Pages >> Different car >> Section 1206 (Lights - Repair) >> 21 rear light cluster >> 63 21 180 Removing and installing/replacing left or right rear light (in side panel)

63 21 180 Removing and installing/replacing left or right rear light (in side panel)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Unfasten plug connection (1) and disconnect.

Release nut (2), tightening torque 2.5 N.m.

Release screws (3), tightening torque 1.5 N.m.

Remove rear light (4) in outwards direction from side panel (5).

Installation: 

If necessary, adjust rear light (4) to fit by way of adjusting elements (6).

Fig 1: Identifying Rear Light Components
G04761755Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Make sure rear light seal (1) is correctly seated, replace if necessary.

Guides (3) of rear light (2) must be visible.

Fig 2: Identifying Rear Light Seal And Guides
G04761754Courtesy of BMW OF NORTH AMERICA, INC.