63 21 055 Replacing a socket housing for left or right rear light (on side panel)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: See 63 99... Instructions for handling light bulbs (exterior lights) .

Fold back cover (1) in direction of arrow and remove.

Fig 1: Removing Back Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Turn socket housing for rear light (1) in direction of arrow and remove from rear light (2).

Cut associated two-core lead with sufficient residual length remaining in vehicle and remove socket housing for rear light (1).

Installation:

Wiring is carried out with connectors.

If necessary, secure two-core lead against rattling.

Fig 2: Turning Socket Housing For Rear Light

Courtesy of BMW OF NORTH AMERICA, INC.