63 12 010 Removing and installing/replacing left headlight (xenon headlight)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove front bumper trim . See 51 11 156 REMOVING AND INSTALLING FRONT BUMPER TRIM .
Release screws (1) and screw (2).
Installation:
Adjust headlight to fit by way of 4 screw fastening points.
Pull headlight (3) forwards slightly.
NOTE:
Direction indicator (4) remains fitted.
Unlock associated plug connections and disconnect.
Remove headlight (3).
Outer screw fastening point:
- Adjust headlight (1) to fit by means of adjusting screw (2).
- Tighten retaining screw (3) while simultaneously gripping nut (4).
Installation:
- Adjust headlights.
Replacement:
- Remove ignition unit and bulb for xenon headlight . See 63 12 870 Replacing ignition unit for left xenon headlight .
- Remove control unit for xenon headlights . See 63 12 860 Replacing control unit for left xenon headlight .
- If necessary, remove drive unit for adaptive headlight . See 63 12 895 Replacing drive for left adaptive headlight .