52 24 005 Removing and installing or replacing rear seat

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

Unclip rear seat on left/right towards top.

Lift rear seat out of vehicle.

Installation:

Feed in seat belt buckles (1) through designated openings in rear seat.

Fig 1: Identifying Seat Belt Buckles

Courtesy of BMW OF NORTH AMERICA, INC.