51 48 001 Removing and installing/replacing insulation lining on hood/bonnet

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Illustration created using the E87 as an example. There may be differences in detail in the case of other vehicle models.

Release threaded rivets (1) on insulation lining (2).

Remove insulation lining (2).

Fig 1: Identifying Threaded Rivets And Insulation Lining

Courtesy of BMW OF NORTH AMERICA, INC.