51 24 165 Removing and installing/replacing side left or right buffer stops on rear lid (Version 1)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The operation is described on the left side; proceed in the same way for the right side.
Press plug (1) on buffer stop (2) in direction of arrow.
IMPORTANT:
Plugs must not drop into rear lid.
Installation:
Adjust both buffer stops (2).