51 16 ... Removing and installing/replacing mounting for cup holder at front

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove storage compartment .

Release screws (1).

Release holder (2) from trim (3).

Fig 1: Identifying Holder, Trim And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts must not be damaged or missing:

Catches
Spring
Plate

Fig 2: Identifying Catches, Spring And Plate
Courtesy of BMW OF NORTH AMERICA, INC.