51 14 000 Removing and installing/replacing front BMW badge

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 318

Lever out badge with special tool 00 9 318 and remove towards top.

Fig 1: Identifying Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts of badge (1) must not be damaged or missing:

2 Guide pins
3 Grommets

Fig 2: Identifying Guide Pin And Grommets
Courtesy of BMW OF NORTH AMERICA, INC.