51 12 827 Removing and installing / replacing guide for bottom rear bumper

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove rear bumper trim

All except M6:

Release nuts (1) on guide (2).

Remove guide (2).

Installation:

If necessary, replace faulty nuts (1).

Fig 1: Identifying Nuts On Guide

Courtesy of BMW OF NORTH AMERICA, INC.

M6 only:

Bend guide (1) downwards slightly and release nuts (2) behind.

Remove guide (1).

Installation:

If necessary, replace faulty nuts (2).

Fig 2: Identifying Guide And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.