LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 48i >> Repair and Diagnosis >> External Pages >> Different car >> Section 1200 (Integrated Suspension Systems - Repair) >> 13 connecting lines >> 37 13 100 Removing and installing/replacing pressure lines for oscillating motor/front axle

37 13 100 Removing and installing/replacing pressure lines for oscillating motor/front axle

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

Remove front pressure lines (1) (from oscillating motor to junction I at side in wheel arch)

Remove rear pressure lines (2) (from junction I to valve block)

Fig 1: Identifying Front Pressure Lines And Rear Pressure Lines
G04760794Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals