LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 48i >> Repair and Diagnosis >> External Pages >> Different car >> Section 1198 (Pedals - Repair) >> 40 accelerator pedal actuation >> 35 40 001 Removing and installing/replacing accelerator pedal module

35 40 001 Removing and installing/replacing accelerator pedal module

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

Unscrew screw.

Pull accelerator pedal module upwards out of fixture.

Installation: 

Tightening torque, 35 40 1AZ.  See PEDALS - TIGHTENING TORQUES -- 650I .

Fig 1: Pulling Accelerator Pedal Module Upwards Out Of Fixture
G04726718Courtesy of BMW OF NORTH AMERICA, INC.

Pull off plug (1).

Remove accelerator pedal module.

Fig 2: Identifying Accelerator Pedal Module Plug
G04726719Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT: Accelerator pedal module can only be replaced completely with adapter plate.
scientia non olet · About LEMON Manuals