34 52 575 Removing and Installing/Replacing Front Pressure Sensor For ACC
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove front right wheel arch trim . See 51 71 040 REMOVING AND INSTALLING/REPLACING FRONT LEFT OR RIGHT WHEEL ARCH COVER
- Read and comply with General Information . See 34 00 ... GENERAL INFORMATION
After completing tasks, bleed brake system . See 34 00 025 REPLACING FLUID IN ABS/ASC+T BRAKE SYSTEM
Apply pedal prop and depress brake pedal slightly. This prevents brake fluid from emerging from the expansion tank and air from entering the brake system after the brake lines have been detached.
Unfasten plug connection (1).
Release pressure sensor (2) and remove.
Installation:
Tightening torque 34 51 12AZ . See 34 51 SLIP CONTROL SYSTEM (ABS, ASC+T, DSC)