34 32 881 Replacing Front Left Or Right Brake Hoses
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
After completing tasks, bleed brake system
. See 34 00 025 REPLACING FLUID IN ABS/ASC+T BRAKE SYSTEM
Apply pedal prop and depress brake pedal slightly. This prevents brake fluid from emerging from the expansion tank when the brake lines are opened.
Pull brake hose out of holder (1).
Detach brake hose from brake line (2).
Installation:
Tightening torque 34 32 1AZ . See 34 32 BRAKE LINES
IMPORTANT:
Grip brake hose at square head (3) so that connecting piece cannot rotate in retaining bracket.
Detach brake hose from brake caliper (4).
Tightening torque 34 32 4AZ . See 34 32 BRAKE LINES
Installation:
First tighten brake hose on brake caliper.
Move wheels into straight-ahead position.
Insert brake hose in bracket and screw onto brake pipe.
IMPORTANT:
Never twist brake hose when installing it and avoid all contact with parts attached rigidly to the body.