Bleeding Rear-Axle Brake Circuit
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
Connect bleeder hose with collecting tray to bleeder valve on rear right brake caliper.
Close bleeder valve.
Run through bleeding routine with BMW Diagnosis and Information System (DIS) with bleeder valve open.
After completing routine, press brake pedal 5 times to floor, clear and bubble-free brake fluid must flow out.
Close bleed valve.
Repeat procedure at rear left.