LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 48i >> Repair and Diagnosis >> External Pages >> Different car >> Section 1197 (Brakes - Repair) >> 00 Brake Testing And Bleeding >> 34 00 025 Replacing Fluid In ABS/ASC+T Brake System >> Notes

34 00 025 Replacing Fluid In ABS/ASC+T Brake System: Notes

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

IMPORTANT: When carrying out repairs to the brake system, follow the procedure set out in Bleeding brake system with DSC. See 34 00 050 BLEEDING BRAKE SYSTEM WITH DSC 

Connect bleeder unit to expansion tank and switch on.

NOTE:

Check relevant Operating Instructions for each device.

Charging pressure should not exceed 2 bar.

Fig 1: Identifying Bleeder Unit To Expansion Tank & Switch
G04726562Courtesy of BMW OF NORTH AMERICA, INC.