33 55 040 Replacing stabilizer links for stabilizer
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
Release nut (1); if necessary, grip at Torx socket.
Installation:
Replace self-locking nut.
Tightening torque 33 55 2AZ , see 55 STABILIZER BAR .
Release nut (2); if necessary, grip at Torx socket.
Remove stabilizer link.
Installation:
Replace self-locking nut.
Tightening torque 33 55 2AZ , see 55 STABILIZER BAR .