LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 48i >> Repair and Diagnosis >> External Pages >> Different car >> Section 1196 (Rear Axle - Repair) >> 11 final drive with cover >> 33 11 ... Replacing rear cover gasket on rear differential (215K)

33 11 ... Replacing rear cover gasket on rear differential (215K)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: To avoid leaks from the rear differential cover, do not use a paper gasket in cars with liquid gaskets!
To prevent the differential oil from foaming over, make sure that no remnants of the liquid gasket are pressed into the rear differential housing.

Release screw (1).

Tightening torque (M10x75) 33 11 1AZ  . See 11-REAR DIFFERENTIAL CASE WITH COVER .

Unscrew screws (2).

Tightening torque (M10x25) 33 11 1AZ  . See 11-REAR DIFFERENTIAL CASE WITH COVER .

Remove cover.

If necessary, remove remnants of liquid gasket with scraper.

Clean sealing face on cover and rear differential.

Installation: 

If a paper gasket was fitted, a paper or liquid gasket can be used.

Fig 1: Identifying Screws
G04742500Courtesy of BMW OF NORTH AMERICA, INC.