52 16 030 Removing And Installing/Replacing Backrest Frame On Left Or Right Front Seat (Sport/Electric) (M5)

WARNING: This page is about a different car, the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2006 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove FRONT SEAT
Remove BACKREST COVER for front seat
Remove HEAD RESTRAINT SUPPORT on front seat
If necessary, remove SEAT BACK WIDTH ADJUSTER from front seat
If necessary, remove LUMBAR CUSHION on front seat

Release all cable straps on wiring harness (1).

Disconnect all marked plug connections.

Feed wiring harness (1) out of backrest frame.

Fig 1: Locating Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip left and right clips (1).

Unhook seat covers (2) on left and right.

Release left and right screws (3).

Installation:

Tightening torque: see 2AZ in 52 10 FRONT SEATS .

Remove backrest frame.

Fig 2: Identifying Left/Right Clips, Seat Cover And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

When replacing backrest or seat frame, break off centering hooks (1) from seat frame.

Fig 3: Identifying Break Off Centering Hooks

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE:

The new backrest frame part contains all the drives.