Axle Shafts: Installation

WARNING: This page is about a different car, the 2005 BMW 645Ci and 2004 BMW 645Ci. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Replace collar nut and lock in place by peening at flat areas of axle shaft. Replace bolts and shims. See TORQUE SPECIFICATIONS .

Fig 1: Identifying Collar Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 2: Identifying Bolts & Shims At Axle Shaft

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 3: Pressing Axle Shaft Off Drive Flange

Courtesy of BMW OF NORTH AMERICA, INC.