11 9 490 Holding Sleeve

WARNING: This page does not describe the selected car, but rather 22 other vehicles, including the 2010 BMW M6, 2010 BMW M5, 2009 BMW M6, 2009 BMW M5, and 2009 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

Note: For protecting camshaft against damage by torsion spring (1 set = 20 pcs.)

Engine: N62, N62TU, N73

Storage location: C45

SI number: 1 14 01(766)

Order number: 11 9 490

Holding sleeve

Fig 1: Identifying Holding Sleeve

Courtesy of BMW OF NORTH AMERICA, INC.