11 9 470 Support
WARNING: This page does not describe the selected car, but rather 22 other vehicles, including the 2010 BMW M6, 2010 BMW M5, 2009 BMW M6, 2009 BMW M5, and 2009 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.
Minimum set: Mechanical tools
Note: For installing/removing bearing bracket (Camcarrier)
Engine: N62, N62TU, N73
SI number: 1 14 01(766)
Order number: 11 9 470
Support
Consisting of:
1 = 11 9 471 Base plate
2 = 11 9 472 Shaped section
3 = 11 9 473 Knurled nut
4 = 11 9 474 Retaining screws (2 x)
5 = 11 9 475 Guide bushes (2 x)
6 = 11 9 476 Shaped section
Note: For securing inlet camshaft during installation in bearing bridge - Engine: N73