11 2 380 Puller

WARNING: This page does not describe the selected car, but rather 22 other vehicles, including the 2010 BMW M6, 2010 BMW M5, 2009 BMW M6, 2009 BMW M5, and 2009 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

NOTE:

For removing rotary shaft seal from timing case cover

Engine: M41, M47, M50, M51, M52, M52TU, M54, M56, M60, M62, S50B30, S50B32, S54, S62, S65, S85, W10, W11

Storage location: A38, C25

SI number: 1 05 92 (507)

Order number: 11 2 380

Puller

Consisting of:

1 = 11 2 381 Threaded bell housing

2 = 11 2 382 Spindle

3 = 11 2 383 Thrust piece

NOTE:

Engine: M41, M47, M50, M51, M52, M60, M62, PENT

11 2 384 Thrust piece

NOTE:

Engine: S50, S54

11 2 385 Spacer bushing

NOTE:

Engine: M41, M50, M51, M52

11 2 386 Thrust piece

NOTE:

Engine: S62, S65, S85

Fig 1: Identifying Puller (11 2 380)

Courtesy of BMW OF NORTH AMERICA, INC.