11 22 Flywheel
WARNING: This page is about a different car, the 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
FLYWHEEL TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Flywheel to crankshaft | ||||
| Manual transmission flywheel to crankshaft | S62 / M60/1 / M60/2 / M62 | Do not install with screw retaining compound. Bolts are a component part of the flywheel. Screw threads oiled. |
105 Nm | |
| Manual transmission flywheel to crankshaft | M40 / M42 / M43 / M43TU / M44 / M70 / S70 / M73 / M57TU | Replace screws | 120 Nm | |
| M57 / M47 / M47TU | Replace screws | 105 Nm | ||
| Automatic flywheel to crankshaft | N62 / N62TU / N73 | Replace screws | 105 Nm | |
| Automatic flywheel to crankshaft | M57 / M57TU / M47 / M47TU / M67 / M67TU | Replace screws | 121 Nm | |
| Manual transmission flywheel to crankshaft | N62 | Do not install with screw retaining compound. Bolts are a component part of the flywheel. Screw threads oiled. |
120 Nm |