13 54 250 Replacing Air Intake Hose (Between Air-Mass Flow Sensor And Throttle Valve Assembly) (N62, N62TU)
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2010 BMW 650i, 2009 BMW 650i, 2008 BMW 750i, 2008 BMW 750Li, and 2008 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Switch off ignition
- Remove ACOUSTIC COVER
Loosen hose clamps (1).
Detach air-mass flow sensor (2) from throttle valve assembly.
Detach air intake hose (2) from air-mass flow sensor.
Installation:
Check sealing rings for damage, replace if necessary.