51 42 030 Removing And Installing/Replacing Decorative Strip On Rear Left Or Right Door Trim Panel

Necessary preliminary tasks: 

• Remove rear door trim panel  . See 51 42 000 REMOVING AND INSTALLING LEFT OR RIGHT REAR DOOR TRIM PANEL .

Unhook Bowden cable for release lever:

• Tighten release lever (1).
• Lever out lock (2).
• Detach Bowden cable (3) towards rear/top.

Installation: 

For fitting, press release lever (1) fully onto door trim panel.

Unfasten screws (1) and nuts (2).

Feed out decorative strip with inside door handle (3).

Release nut (1) and remove inside door handle (2) from decorative strip (3).

Installation: 

Threaded pins (4) must not be damaged.