51 16 040 Removing And Installing/Replacing Housing On Left Or Right Door Mirror

Necessary preliminary tasks:

Remove mirror glass . See 51 16 026 REPLACING MIRROR GLASS FOR REAR-VIEW MIRROR (ON FRONT DOOR) .

NOTE: Housing (2) is secured without play by four multitooth catches (1) on retaining ring (3).
Secure housing on door mirror (2) against falling out.

Unlock multitooth catches (1) with a screwdriver.

Unclip housing (2) forwards from retaining ring (3) and remove.

Fig 1: Identifying Housing And Retaining Ring

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Multitooth catches (1) and guide (2) on housing (3) must not be damaged.

Fig 2: Identifying Multitooth Catches And Guide On Housing

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Locators (1) on retaining plate (2) must not be damaged.

Fig 3: Identifying Retaining Plate

Courtesy of BMW OF NORTH AMERICA, INC.