51 11 185 Removing and installing/replacing side grille in bumper trim (from 03/2010)

Special tools required:

00 9 323 (Scraper)

IMPORTANT: Damage to paintwork! To avoid paint damage, tape off painted surface in lever area.

Unclip latch mechanisms (1) with special tool 00 9 3235 and remove ornamental grille (2) towards front. Installation note: Latch mechanisms (1) must not be damaged.

Fig 1: Unclip Latch Mechanisms (1) And Remove Ornamental Grille (2) Towards Front

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: Modify trim bridge (1); to do so, unclip latch mechanism (2).

Installation note: Latch mechanism (2) on trim bridge should not be damaged.

Fig 2: Modify Trim Bridge (1) By Unclipping Latch Mechanism (2)

Courtesy of BMW OF NORTH AMERICA, INC.