51 11 180 Removing And Installing/Replacing Grille In Bumper Trim (Bottom Middle)

Necessary preliminary tasks:

Version with Park Distance Control:

Disconnect plug connection (1).

Unfasten cable tie (2).

Fig 1: Identifying Plug Connection And Cable Tie

Courtesy of BMW OF NORTH AMERICA, INC.

Release catches along line (1) and remove grille (2).

Installation:

Catches must not be damaged

Fig 2: Identifying Catches Line And Grille

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

If necessary, remove ultrasonic transducer (1).

Release catches along line (1) and remove grille (3) from cover (4).

Installation:

Catches must not be damaged

Fig 3: Identifying Ultrasonic Transducer And Grille

Courtesy of BMW OF NORTH AMERICA, INC.