32 31 003 Removing And Installing/Replacing Upper Section Of Steering Column Trim

Special tools required:

Move steering column in "bottom" and "extended" position.

IMPORTANT: Risk of damage!
Unclip steering column trim (1) at side with special tool 00 9 323.

Fig 1: Identifying Column Trim And Special Tool (00 9 323)

Courtesy of BMW OF NORTH AMERICA, INC.

Tilt steering column trim (1) towards front.

Unclip steering column gap cover (2) from steering column trim (1).

Installation:

Tilt steering column trim towards rear, align by way of locks to lower section (of steering column trim) and press down.

Fig 2: Identifying Steering Column Gap Cover And Steering Column Trim

Courtesy of BMW OF NORTH AMERICA, INC.