LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 35d >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Axle - Repair >> 35 Stabilizer Bar >> 31 35 005 Removing And Installing/Replacing Push Rod (Stabilizer Link) For Left/Right Stabilizer

31 35 005 Removing And Installing/Replacing Push Rod (Stabilizer Link) For Left/Right Stabilizer

IMPORTANT: Observe safety when raising the vehicle.
Do not mix up stabilizer links
  1. Stabilizer link for conventional stabilizer
  2. Stabilizer link for active stabilizer
Fig 1: Identifying Stabilizer Link For Conventional And Active Stabilizer
G04794372Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nut (1).

Installation: 

Replace self-locking nut.

Tightening torque. See FRONT AXLE - TIGHTENING TORQUES .

Fig 2: Identifying Self-Locking Nut
G04794373Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nut (1).

Remove stabilizer link (2).

Installation: 

Replace self-locking nut.

Tightening torque. See FRONT AXLE - TIGHTENING TORQUES .

Fig 3: Identifying Stabilizer Link And Nut
G04794374Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals