37 14 Electric Components

TIGHTENING TORQUES - ELECTRIC COMPONENTS

	Type	Thread	Tightening specification	Measure
1AZ Bracket, ride-height sensor, to body	E70	M6		8 Nm
2AZ Bracket ride level sensor to rear axle carrier	E70	M6		8 Nm
3AZ Ride level sensor to holder	E70	M5		5 Nm
4AZ Sensor lever, ride-height sensor to jointed rod	E70	M6	Replace nut	8 Nm
5AZ Jointed rod to upper control arm	E70	M6	Replace nut	8 Nm
6AZ Jointed rod to swinging arm	E70	M6	Replace nut	8 Nm
7AZ Transversal acceleration sensor to body	E70	M6	Replace nuts	8 Nm
8AZ Control unit Dynamic Drive ECU to cockpit support structure	E70	M5x15		6 Nm
9AZ Valve block to holder	E70	M6		8 Nm
10AZ Holder, valve block, to body	E70	M6	Replace nuts	8 Nm
11AZ Dynamic Drive pressure line to valve block	E70			35 Nm
12AZ Return line to valve block	E70			40 Nm
13AZ Control lines for oscillating motor, front, to valve block	E70	M14		35 Nm
14AZ Control lines for oscillating motor, rear, to valve block	E70	M14		35 Nm
15AZ Connecting nuts, hydraulic lines (pressure line / control lines)	E70			30 Nm
16AZ Connecting nuts, hydraulic lines (return)	E70			35 Nm
17AZ Line holder / pipe holder / holder	E70	M6		8 Nm
E70	M8			20.5 Nm
18AZ Control lines to oscillating motor	E70			30 Nm
19AZ Protective plate to rear axle carrier	E70	M10		38 Nm
	E70	M6		8 Nm
20AZ Retaining bar, stabilizer, to front axle carrier	E70	M10		56 Nm
21AZ Retaining bracket, stabilizer bar to rear axle support	E70	M10		56 Nm
22AZ Screw pins for pipe holder	E70		Replace screw pins	1.5 Nm
23AZ Spring-type actuator to oscillating motor, front	E70			30 Nm
24AZ Pressure relief valve to oscillating motor, front	E70			14 + 4 Nm
25AZ Line holder for control lines to front axle oscillating motor	E70			3 Nm
26AZ Lines to spring-type actuator	E70			14 Nm
27AZ Block screw connection, hydraulic lines	E70, E70M / E71, E71M			12 Nm