61 31 229 Removing And Installing/Replacing Both Switches On Sport Steering Wheel
Necessary preliminary tasks:
- Disconnect battery negative lead . See 61 20 900 DISCONNECTING AND CONNECTING BATTERY NEGATIVE LEAD .
- Remove airbag unit . See 32 34 020 REMOVING AND INSTALLING/REPLACING AIRBAG UNIT .
NOTE:
Illustration shows steering wheel removed.
Release screws (1).
NOTE:
Both sport steering wheel switches (1) are connected to each other by the wiring harness.
Disconnect plug connections (2).
Pull switches (1) with design cover (3) in direction of arrow out of steering wheel.
Installation:
Make sure electrical leads are correctly routed.
Release screws (1).
Feed wiring harness (3) out of design cover (4).
Remove switches (2) from design cover (4).
Installation:
Make sure electrical leads are correctly routed.