61 31 221 Removing And Installing/Replacing Both MULTIFUNCTION Steering Wheel Switches
Necessary preliminary tasks:
- Disconnect battery negative lead . See 61 20 900 DISCONNECTING AND CONNECTING BATTERY NEGATIVE LEAD .
- Remove airbag unit . See 32 34 020 REMOVING AND INSTALLING/REPLACING AIRBAG UNIT .
NOTE:
Illustration shows steering wheel removed.
Release screws (1).
NOTE:
Both multifunction steering wheel switches (1) are connected to each other by the wiring harness.
Disconnect plug connections (2).
Feed wiring harness (3) out of steering wheel.
Pull multifunction steering wheel switches (1) in direction of arrow out of steering wheel.
Installation:
Make sure electrical leads are correctly routed.