65 50 150 Removing And Installing/Replacing Trim For Rear Cabin Monitor Base At Front

Special tools required: 

• 00 9 340 

Using special tool 00 9 340  , unclip trim (1) on both sides.

Fig 1: Identifying Special Tool (00 9 340)

Courtesy of BMW OF NORTH AMERICA, INC.

Open armrest (1).

Unclip trim (2) with special tool 00 9 340  and feed out.

Replacement: 

Trims may only be replaced in pairs so as to avoid differences in color.

Fig 2: Identifying Special Tool (00 9 340)

Courtesy of BMW OF NORTH AMERICA, INC.