65 13 065 Removing And Installing/Replacing Front Speaker Carrier (Instrument Panel)

Special tools required:

Unclip trim (1) with special tool 00 9 317 from catches.

Fig 1: Identifying Special Tool (00 9 317) On Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Remove speaker carrier and disconnect associated plug connection.

Fig 2: Identifying Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining lugs (1) must not be damaged

Fig 3: Identifying Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Disconnect plug connection (1) and feed out speaker (2).

Fig 4: Identifying Plug Connection And Speaker

Courtesy of BMW OF NORTH AMERICA, INC.