17 22 Engine oil cooler and lines
WARNING: This page is about a different variant/trim than selected.
TECHNICAL DATA - ENGINE OIL COOLER AND LINES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Transmission oil cooler line to transmission oil cooler | N62TU / N52K / M57T2 | M6 x 35 | 8 Nm | |
| 2AZ Transmission oil cooler to front axle carrier | N62TU / N52K / M57T2 | M6 x 35 | 8 Nm | |
| 3AZ Transmission oil cooler line holder to transmission bell housing | N62TU / N52K / M57T2 | M6 x 30 | 8 Nm | |
| 4AZ Engine oil cooler line to engine oil cooler | N62TU / M57T2 | M6 x 35 | 8 Nm | |
| 5AZ Engine oil cooler to side panel module | N62TU / M57T2 | M6 x 35 | 8 Nm | |
| 6AZ Holder, engine oil cooler lines, to timing case cover | N62TU / M57T2 | M6 x 15 | 8 Nm | |
| 7AZ Engine oil cooler line to holder | N62TU / M57T2 | M6 x 30 | 8 Nm | |
| 8AZ Engine oil cooler lines to control valve | N62TU / M57T2 | M8 x 35 | 19 Nm |