LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 35d >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Cooling System - Tightening Torques (N52, N62)) >> 00 cooling checking cooling system >> 17 00 Coolant

17 00 Coolant

WARNING: This page is about a different variant/trim than selected.
TECHNICAL DATA - COOLANT

  Type Thread Tightening specification Measure
1AZ Hose clamps to coolant hoses 32 ... 48 mm dia. All     2.5 Nm
2AZ Bleed screw (WAF 8) to thermostat housing All, without E46     8 Nm
Plastic bleed screws to coolant lines E46     2 -0.5/+1 Nm
3AZ Level switch (WAF 30) to coolant expansion tank All     3 Nm
4AZ Bleed screw to water valve or auxiliary water pump E90 / E91     3.5 Nm