52 Plug connections, terminals, loose parts
WARNING: This page is about a different variant/trim than selected.
PLUG CONNECTIONS, TERMINALS, LOOSE PARTS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Holder, wiring harness, to cylinder head | N52 / N52K / N54 | M6x12 | 8 Nm | |
| 2AZ Cable duct to cylinder head cover | N52 / N52K / N53 / N54 | M6 | Replace screws | 3 Nm + 45 degrees |
| 3AZ Ground cable to crankcase (electr. coolant pump) | N52 / N54 / N52K / N51 / N53 | M8 | Replace screws | 8 Nm + 45 degrees |
| 4AZ Assembly: holder, monitor sensors | N54 | M6x12 | 8 Nm |