Minimum set: Mechanical tools
WARNING: This page is about a different variant/trim than selected.
NOTE:
For firmly holding torque converter in position while removing and installing transmission
Transmission: A4S 310R, A5S 300J, A5S 310Z, A5S 325Z, A5S 360R, A5S 390G, A5S 440Z, A5S 560Z, GA6 HP26Z
Storage location: A33
SI number: 1 05 97 (181)
Order number: 24 4 130
Locating tool
Consisting of:
1 = 24 4 131 Base unit
2 = 24 4 132 Blade
NOTE:
Transmission: A5S 440Z, GA6HP26Z (N62)
3 = 24 4 133 Blade
NOTE:
Transmission: A4S 310R and A5S 390G
4 = 24 4 134 Blade
NOTE:
Transmission: A5S 310Z, A5S 560Z, A5S 300J and A5S 325Z
5 = 24 4 135 Blade
NOTE:
Transmission: A5S 560Z, GA6 HP26Z (M67), GA6 HP32Z (N73)
6 = 24 4 136 Counter plate
7 = 24 4 137 Blade
NOTE:
Transmission: A5S 360R